Contactor KM2315

We sell contactors KM2315, KM 2315, KM-2315, KM2355, KM-2355 to 300A with control circuit coils = 24V, = 110V, 220V 50Hz, 380V 50Hz. Good quality and price. They are successfully used contactors KM-2315, KM 2315, KM2315-28, RV 2355 in electrical networks of enterprises in Ukraine, Moldova, Kazakhstan, Mongolia, Lithuania, Turkey, Estonia, Latvia, Algeria, Poland, East Germany, Georgia, Bulgaria, Romania, Hungary, Sudan, South Africa, South Korea, Sri Lanka, India, Armenia, Uzbekistan, Tajikistan, Kirghizia, Turkmenistan, Slovakia, Poland, Slovenia, Azerbaijan, Armenia, Czech Republic, Albania, Serbia, Montenegro, Slovakia, Iraq, Sri Lanka, Moldova, Vietnam and in many other countries of the world - in Europe, Africa, Asia. We export contacktors KM2315. Sale. We are able to supply the entire line of KM series contactors. for example: KM2333, KM2334, KM2233, KM2314, KM2125, KM2211, KM2231, KM2332, KM2232, etc. Constantly available, the weight of the contactors is within the range of 28.2 kg.

The KM-2315 contactor consists of the following main units: contact and arc-extinguishing, mobile, electromagnetic systems; contacts of the auxiliary circuit and the base. Contact system of the contactor - bridge type.

The movable contact of the closing main contact is fixed on the lath of the mobile system. The stationary contacts are located in the arc extinguishing chamber. The movable contact is mounted on the guide shoe in the contact holder. Contact pressing is created by the spring and is regulated by washers.

The contactor CM 2315 has a movable contact and fixed contacts of the disconnecting main contact located in the arc extinguishing chamber.

The contact bridge in KM-2315 is installed in an insulating plug, with which the contact is opened. The insulating plug moves in the guide bushing. Contact pressing is created by a spring.

The movable contact of the 300 A contactor consists of two contact bridges.

For 300 A AC contactors, the current is supplied to the output portions of the stationary contacts protruding from the chamber. The electric arc is extinguished in the arc extinguishing chamber. The arc extinguishing chamber consists of a chamber base and a cover made of arc-resistant press materials.

At a constant current, the arc is extinguished by means of an electromagnetic blast created by the arc quenching coil and the cheeks of the magnetic circuit, alternating current at the KM2335 contactors by 300 - with the help of steel deionic plates installed in the base and the cover of the chamber.

The moving system consists of a bracket and a bar on which movable contacts and contact parts of the auxiliary circuit are attached. The mobile system is hinged with the armature and is partially balanced by the load with the help of the levers. The electromagnetic system consists of a core, an armature and a coil.